Skip to content

MOX B (Extension)⚓︎

Key features⚓︎

MOX B allows you to add more hardware to your configuration. It contains a mPCIe slot for a compatible Wi-Fi card, disk controller or LTE modem. If you choose to install an LTE modem, the MOX B features a SIM card slot that you can use.

If you use Wi-Fi networks, we recommend using the original MOX Wi-Fi add-on (mPCIe) which can deliver significantly higher speeds than SDIO Wi-Fi.

Specification⚓︎

Picture of the board

  • 1× miniPCIe slot
  • 1× SIM card slot
  • 1× 64 pin female connector and 1× 64 pin male connector for connection additional modules
  • 2 years warranty
  • Size: 100 mm × 58 mm × 14 mm (without case)
  • Ambient operating temperature: 0 °C to 40 °C (40 °F to 104 °F)
  • Humidity: 10% to 90% RH, Non-condensing

Compatibility⚓︎

There can be only one MOX B module in the configuration; the PCIe bus is terminated there. For this reason, the MOX B cannot be combined with MOX F. If you need a module with the same parameters but with PCIe signal passing through, choose MOX G.

This module can be used only as an extension in a set. You will need at least MOX Start. It is included in the MOX Power Wi-Fi and MOX Classic sets. If you’re combining it with other modules, make sure they are compatible. You can verify the order of modules and pass-through of PCIe and SGMII signals in the configurator on https://mox-configurator.turris.cz.


2022-02-15 2019-07-17