Struct unix_socket::UnixStream
[−]
[src]
pub struct UnixStream { /* fields omitted */ }
A Unix stream socket.
Examples
use unix_socket::UnixStream; use std::io::prelude::*; let mut stream = UnixStream::connect("/path/to/my/socket").unwrap(); stream.write_all(b"hello world").unwrap(); let mut response = String::new(); stream.read_to_string(&mut response).unwrap(); println!("{}", response);
Methods
impl UnixStream
[src]
fn connect<P: AsRef<Path>>(path: P) -> Result<UnixStream>
Connects to the socket named by path
.
Linux provides, as a nonportable extension, a separate "abstract"
address namespace as opposed to filesystem-based addressing. If path
begins with a null byte, it will be interpreted as an "abstract"
address. Otherwise, it will be interpreted as a "pathname" address,
corresponding to a path on the filesystem.
fn pair() -> Result<(UnixStream, UnixStream)>
Creates an unnamed pair of connected sockets.
Returns two UnixStream
s which are connected to each other.
fn try_clone(&self) -> Result<UnixStream>
Creates a new independently owned handle to the underlying socket.
The returned UnixStream
is a reference to the same stream that this
object references. Both handles will read and write the same stream of
data, and options set on one stream will be propogated to the other
stream.
fn local_addr(&self) -> Result<SocketAddr>
Returns the socket address of the local half of this connection.
fn peer_addr(&self) -> Result<SocketAddr>
Returns the socket address of the remote half of this connection.
fn set_read_timeout(&self, timeout: Option<Duration>) -> Result<()>
Sets the read timeout for the socket.
If the provided value is None
, then read
calls will block
indefinitely. It is an error to pass the zero Duration
to this
method.
fn set_write_timeout(&self, timeout: Option<Duration>) -> Result<()>
Sets the write timeout for the socket.
If the provided value is None
, then write
calls will block
indefinitely. It is an error to pass the zero Duration
to this
method.
fn read_timeout(&self) -> Result<Option<Duration>>
Returns the read timeout of this socket.
fn write_timeout(&self) -> Result<Option<Duration>>
Returns the write timeout of this socket.
fn set_nonblocking(&self, nonblocking: bool) -> Result<()>
Moves the socket into or out of nonblocking mode.
fn take_error(&self) -> Result<Option<Error>>
Returns the value of the SO_ERROR
option.
fn shutdown(&self, how: Shutdown) -> Result<()>
Shuts down the read, write, or both halves of this connection.
This function will cause all pending and future I/O calls on the
specified portions to immediately return with an appropriate value
(see the documentation of Shutdown
).
Trait Implementations
impl Debug for UnixStream
[src]
impl Read for UnixStream
[src]
fn read(&mut self, buf: &mut [u8]) -> Result<usize>
Pull some bytes from this source into the specified buffer, returning how many bytes were read. Read more
unsafe fn initializer(&self) -> Initializer
read_initializer
)Determines if this Read
er can work with buffers of uninitialized memory. Read more
fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>
1.0.0
Read all bytes until EOF in this source, placing them into buf
. Read more
fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>
1.0.0
Read all bytes until EOF in this source, placing them into buf
. Read more
fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>
1.6.0
Read the exact number of bytes required to fill buf
. Read more
fn by_ref(&mut self) -> &mut Self
1.0.0
Creates a "by reference" adaptor for this instance of Read
. Read more
fn bytes(self) -> Bytes<Self>
1.0.0
Transforms this Read
instance to an Iterator
over its bytes. Read more
fn chars(self) -> Chars<Self>
🔬 This is a nightly-only experimental API. (io
)
the semantics of a partial read/write of where errors happen is currently unclear and may change
Transforms this Read
instance to an Iterator
over char
s. Read more
fn chain<R>(self, next: R) -> Chain<Self, R> where
R: Read,
1.0.0
R: Read,
Creates an adaptor which will chain this stream with another. Read more
fn take(self, limit: u64) -> Take<Self>
1.0.0
Creates an adaptor which will read at most limit
bytes from it. Read more
impl<'a> Read for &'a UnixStream
[src]
fn read(&mut self, buf: &mut [u8]) -> Result<usize>
Pull some bytes from this source into the specified buffer, returning how many bytes were read. Read more
unsafe fn initializer(&self) -> Initializer
read_initializer
)Determines if this Read
er can work with buffers of uninitialized memory. Read more
fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>
1.0.0
Read all bytes until EOF in this source, placing them into buf
. Read more
fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>
1.0.0
Read all bytes until EOF in this source, placing them into buf
. Read more
fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>
1.6.0
Read the exact number of bytes required to fill buf
. Read more
fn by_ref(&mut self) -> &mut Self
1.0.0
Creates a "by reference" adaptor for this instance of Read
. Read more
fn bytes(self) -> Bytes<Self>
1.0.0
Transforms this Read
instance to an Iterator
over its bytes. Read more
fn chars(self) -> Chars<Self>
🔬 This is a nightly-only experimental API. (io
)
the semantics of a partial read/write of where errors happen is currently unclear and may change
Transforms this Read
instance to an Iterator
over char
s. Read more
fn chain<R>(self, next: R) -> Chain<Self, R> where
R: Read,
1.0.0
R: Read,
Creates an adaptor which will chain this stream with another. Read more
fn take(self, limit: u64) -> Take<Self>
1.0.0
Creates an adaptor which will read at most limit
bytes from it. Read more
impl Write for UnixStream
[src]
fn write(&mut self, buf: &[u8]) -> Result<usize>
Write a buffer into this object, returning how many bytes were written. Read more
fn flush(&mut self) -> Result<()>
Flush this output stream, ensuring that all intermediately buffered contents reach their destination. Read more
fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>
1.0.0
Attempts to write an entire buffer into this write. Read more
fn write_fmt(&mut self, fmt: Arguments) -> Result<(), Error>
1.0.0
Writes a formatted string into this writer, returning any error encountered. Read more
fn by_ref(&mut self) -> &mut Self
1.0.0
Creates a "by reference" adaptor for this instance of Write
. Read more
impl<'a> Write for &'a UnixStream
[src]
fn write(&mut self, buf: &[u8]) -> Result<usize>
Write a buffer into this object, returning how many bytes were written. Read more
fn flush(&mut self) -> Result<()>
Flush this output stream, ensuring that all intermediately buffered contents reach their destination. Read more
fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>
1.0.0
Attempts to write an entire buffer into this write. Read more
fn write_fmt(&mut self, fmt: Arguments) -> Result<(), Error>
1.0.0
Writes a formatted string into this writer, returning any error encountered. Read more
fn by_ref(&mut self) -> &mut Self
1.0.0
Creates a "by reference" adaptor for this instance of Write
. Read more
impl AsRawFd for UnixStream
[src]
impl FromRawFd for UnixStream
[src]
unsafe fn from_raw_fd(fd: RawFd) -> UnixStream
Constructs a new instance of Self
from the given raw file descriptor. Read more
impl IntoRawFd for UnixStream
[src]
fn into_raw_fd(self) -> RawFd
Consumes this object, returning the raw underlying file descriptor. Read more